 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LH1513AB/AAC/AACTR 2 Form A Solid State Relay FEATURES * Current Limit Protection * l/O Isolation, 5300 VRMS * Typical RON 10 * Load Voltage 200 V * Load Current 140 mA * High Surge Capability * Linear, AC/DC Operation * Clean Bounce Free Switching * Low Power Consumption * High Reliability Monolithic Receptor * SMD Lead Available on Tape and Reel AGENCY APPROVALS * UL - File No. E52744 * CSA - Certification 093751 * VDE 0884 Approval APPLICATIONS * General Telecom Switching - On/off Hook Control - Ring Delay - Dial Pulse - Ground Start - Ground Fault Protection * Instrumentation * Industrial Controls DESCRIPTION The LH1513 relays are DPST normally open switches (2 Form A) that can replace electromechanical relays in many applications. The relays are constructed using a GaAlAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology, is comprised of a photodiode array, switch control circuity, and DMOS switches. In addition, these relays employ current-limiting circuity, enabling them to pass FCC 68.302 and other regulatory voltage surge requirements when overvoltage protection is provided. 4 typ. .050 (1.27) typ. Package Dimensions in Inches (mm) DIP pin one ID 4 .268 (6.81) .255 (6.48) 5 6 7 8 1 2 3 4 3 2 1 S1 8 S1' 7 S2 6 S2' 5 S1 S2 S1' S2' .390 (9.91) .379 (9.63) .045 (1.14) .030 (0.76) 4 typ. .031 (0.79) .300 (7.62) typ. .150 (3.81) .130 (3.30) .050 (1.27) .022 (.56) .018 (.46) .035 (.89) .020 (.51) .100 (2.54) typ. 10 3-9 .012 (.30) .008 (.20) .130 (3.30) .110 (2.79) .250 (6.35) .230 (5.84) SMD Pin one I.D. .268 (6.81) .255 (6.48) .390 (9.91) .379 (9.63) .031 (.79) typ. .150 (3.81) .130 (3.30) .395 (10.03) .375 (9.52) .312 (7.80) .298 (7.52) 3 to 7 .045 (1.14) .030 (0.78) Radius .008 (.25) .004 (.10) .040 (1.02) .020 (.51) .100 (2.54) typ. 10 .315 (8.00) typ. .010 (2.54) typ. Part Identification Part Number LH1513AB LH1513AAC LH1513AACTR Description 8-pin DIP, Tubes 8-pin SMD, Gullwing, Tubes 8-pin SMD, Gullwing, Tape and Reel Document Number: 83813 Revision 17-August-01 www.vishay.com 3-67 Recommended Operating Conditions 140 120 Load Current (mA) 100 80 IFon=3.0 mA 60 IFon=5.0 mA IFon=7.0 mA 40 I =8.0 to 20 mA Fon Absolute Maximum Ratings, TA=25C Stresses in excess of the Absolute Maximum Ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to maximum rating conditions for extended periods can adversely affect device reliability. 20 0 -40 -20 0 20 40 60 Ambient Temperature (C) 80 Ambient Temperature Range (TA) .................................... -40 to +85C Storage Temperature Range (Tstg) ................................. -40 to +150C Pin Soldering Temperature (t=10 s max) (TS) ............................. 260C Input/Output Isolation Voltage (VISO) .................................. 5300 VRMS Pole-to-Pole Isolation Voltage (S1 to S2)...................................... 500 V LED Continuous Forward Current (IF) .........................................50 mA LED Reverse Voltage (IR10 A) (VR)........................................... 8.0 V DC or Peak AC Load Voltage (IL50 A) (VL) .............................. 200 V Continuous DC Load Current (IL) One Pole Operating.................................................................200 mA Two Poles Operating ...............................................................140 mA Peak Load Current (t=100 ms) (single shot) (IP) ................................ Output Power Dissipation (continuous) (PDISS)........................ 600 mW Refer to Current Limit Performance Application Note for a discussion on relay operation during transient currents. Electrical Characteristics, TA=25C Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Parameter Input LED Forward Current, Switch Turn-on LED Forward Current, Switch Turn-off LED Forward Voltage Output ON-resistance Pole-to-Pole ON-resistance Matching (S1 to S2) OFF-resistance Current Limit Off-state Leakage Current IFon IFoff VF -- 0.2 1.15 2.0 0.8 1.26 3.0 -- 1.45 mA mA V G mA nA A pF IL=100 mA, t=10 ms VL150 V IF=10 mA IF=5.0 mA, IL=50 mA IF=5.0 mA, IL=50 mA IF=0 mA, VL=100 V IF=5.0 mA, t=5.0 ms VL5.0 V IF=0 mA, VL=100 V IF=0 mA, VL=200 V IF=0 mA, VL=1.0 V IF=0 mA, VL=50 V pF IF=0 mA IF=5.0 mA V IF=5.0 mA VISO=1.0 V IF=10.0 mA, IL=50 mA IF=10.0 mA, IL=50 mA Sym. Min. Typ. Max. Units Test Conditions RON -- ROFF ILMT 6.0 -- 0.5 300 -- -- 10 0.1 5000 360 0.02 -- 60 15 3.0 4.0 0.15 15 1.0 -- 460 200 1.0 -- -- -- -- -- -- Output Capacitance -- -- -- Pole-to-Pole Capacitance (S1 to S2) -- -- -- Switch Offset Transfer Input/Output Capacitance Turn-on Time Turn-off Time -- -- CISO ton toff -- -- -- 1.1 1.6 0.65 -- 2.5 2.5 pF ms ms Document Number: 83813 Revision 17-August-01 www.vishay.com 3-68 Typical Performance Characteristics Figure 1. LED Voltage vs. Temperature 1.6 1.5 LED Forward Voltage (V) 1.4 1.3 1.2 1.1 IF=1.0 mA IF=2.0 mA IF=5.0 mA IF=10 mA -20 0 20 40 60 Ambient Temperature (C) 80 IF=20 mA Figure 4. LED Dropout Voltage vs. Temperature 1.20 IL= 100 mA IF=50 mA LED Forward Voltage (V) 1.15 TYP. 1.10 MIN. 1.05 1.00 1.0 -40 0.95 -40 -20 0 20 40 60 80 Ambient Temperature (C) Figure 2. LED Current for Switch Turn-on vs. Temperature 100 LED Forward Current for Switch Turn-on (%), Normalized to 25C IL= 100 mA Figure 5. Current Limit vs. Temperature 40 Change in Current Limit (%) Normalized to 25C 30 20 10 0 -10 -20 -30 IF= 5.0 mA t = 5.0 ms VL= SEE ELEC. CHAR. 80 60 40 20 0 -20 -40 -60 -40 -20 0 20 40 60 80 -40 -40 -20 0 20 40 60 80 Ambient Temperature (C) Ambient Temperature (C) Figure 3. On-resistance vs. Temperature 50 IL= 50 mA 40 Change in ON-resistance (%) Normalized to 25C 30 20 10 0 -10 -20 -30 -40 -40 -20 0 20 40 60 80 Figure 6. Variation in On-resistance vs. LED Current 1.5 ac/dc On-resistance Variation (%) Normalized to Data Sheet RON Specification at IF=5.0 mA IL= 50 mA 1.0 0.5 0 -0.5 0 4 8 12 16 20 LED Forward Current (mA) Ambient Temperature (C) Document Number: 83813 Revision 17-August-01 www.vishay.com 3-69 Figure 7. Switch Capacitance vs. Applied Voltage 80 70 60 Capacitance (pF) 50 40 30 20 10 0 0 20 40 60 80 100 IF=0 mA TA=25C f=1.0 MHz Figure 10. Insertion Loss vs. Frequency 0.30 0.25 Insertion Loss (dB) 0.20 0.15 0.10 0.05 0 RL= 600 102 103 Frequency (Hz) 104 105 Applied Voltage (V) Figure 8. Output Isolation 100 80 Figure 11. Leakage Current vs. Applied Voltage 100 Off-state Leakage Current (pA) 90 80 70 60 50 40 30 20 10 IF= 0 mA TA= 25 C Isolation (dB) 60 VP=10 V RL=50 40 20 0 102 103 104 105 106 107 0 0 50 100 150 200 250 300 350 400 Frequency (Hz) Load Voltage (V) Figure 9. Leakage Current vs. Applied Voltage at Elevated Temperatures 3.0 Figure 12. Switch Breakdown Voltage vs. Temperature 8 Change in Breakdown Voltage (%) Normalized to 25C 6 4 2 0 -2 -4 -6 -8 -40 -20 0 20 40 60 80 Off-state Leakage Current (nA) 2.5 85C 2.0 1.5 1.0 0.5 50C 0 0 50 100 150 200 250 300 350 400 70C Load Voltage (V) Ambient Temperature (C) Document Number: 83813 Revision 17-August-01 www.vishay.com 3-70 Figure 13. Switch Offset Voltage vs. Temperature 3.5 IF= 5.0 mA 3.0 Switch Offset Voltage (V) 2.5 2.0 1.5 1.0 0.5 0 Figure 16. Switch Offset Voltage vs. LED Current 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 LED Forward Current (mA) 20 30 40 50 60 70 80 90 Ambient Temperature (C) Figure 14. Turn-on Time vs. Temperature 60 50 40 30 20 10 0 -10 -20 -30 -40 -40 -20 0 20 40 60 80 IF=5.0 mA IL=50 mA Figure 17. Turn-off Time vs. Temperature 160 140 Change in Turn-off Time (%) Normalized to 25C 120 100 80 60 40 20 0 -20 -40 -60 -80 -40 IF=5.0 mA IL=50 mA Change in Turn-on Time (%) Normalized to 25C Switch Offset Voltage (V) -20 0 20 40 60 80 Ambient Temperature (C) Ambient Temperature (C) Figure 15. Turn-on Time vs. LED Current 10 IL=50 mA Figure 18. Turn-off Time vs. LED Current 0.9 -40C 0.8 Turn-off Time (ms) 0.7 25C 0.6 0.5 85C IL=50 mA 8 Turn-on Time (ms) 6 -40C 25C 4 85C 2 0.4 0.3 0 10 20 30 40 50 0 10 20 30 40 0 50 LED Forward Current (mA) LED Forward Current (mA) Document Number: 83813 Revision 17-August-01 www.vishay.com 3-71 |
Price & Availability of LH1513AB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |